Toyota Avalon Service & Repair Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN

(a) Secure the brake master cylinder sub-assembly in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

(b) Using a 5 mm pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.

NOTICE:

Do not drop the brake master cylinder reservoir assembly.

2. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

(a) Remove the brake master cylinder reservoir assembly from the brake master cylinder body.

3. REMOVE MASTER CYLINDER RESERVOIR GROMMET

(a) Remove the 2 master cylinder reservoir grommets from the brake master cylinder body.

(b) Remove the brake master cylinder body from the vise.

4. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

5. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER

    Components

    Inspection

    See More:

    Toyota Avalon Service & Repair Manual > Automatic Transaxle System: Road Test
    ROAD TEST PROBLEM SYMPTOM CONFIRMATION (a) Based on the result of the customer problem analysis, try to reproduce the symptoms. If the problem is that the transaxle does not shift up, shift down, or the shift point is too high or too low, conduct the following road test referring to the automatic sh ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0175