REASSEMBLY PROCEDURE 1. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER 2. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY 3. INSTALL MASTER CYLINDER RESERVOIR GROMMET (a) Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.
(b) Install the 2 master cylinder reservoir grommets to the brake master cylinder body. 4. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (a) Secure the brake master cylinder body in a vise. NOTICE: Place aluminum plates on the vise to prevent damage to the brake master cylinder body. (b) Install the brake master cylinder reservoir assembly to the brake master cylinder body. NOTICE: Do not drop the brake master cylinder reservoir assembly. 5. INSTALL BRAKE MASTER CYLINDER STRAIGHT PIN
(b) Remove the brake master cylinder sub-assembly from the vise. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Front Seatback Heater: Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL FRONT SEATBACK HEATER ASSEMBLY (a) Install the front seatba ...