Toyota Avalon Service & Repair Manual: How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

*: Use the Techstream.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

NEXT

2.

CUSTOMER PROBLEM ANALYSIS

(a) Interview the customer and confirm the problem.

Click here

NEXT

3.

INSPECT BATTERY VOLTAGE

Standard Voltage:

11 to 14 V

  • If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
NEXT

4.

CHECK DTC AND FREEZE FRAME DATA*

(a) Check and record DTCs and freeze frame data.

Chassis > ABS/VSC/TRAC/EPB > Trouble Codes

(b) Clear the DTCs and freeze frame data.

Chassis > ABS/VSC/TRAC/EPB > Clear DTCs

(c) Recheck for DTCs.

(1) Reconfirm the DTCs based on the recorded DTCs and freeze frame data.

Chassis > ABS/VSC/TRAC/EPB > Trouble Codes

(2) Try to reproduce the problem symptoms based on the recorded DTCs and freeze frame data, and then check if the DTCs are output again.

Result

Proceed to

DTCs are not output (Problem symptom occurs.)

A

DTCs are output

B

DTCs are not output (Problem symptom does not occur.)

C

HINT:

  • Refer to Diagnostic Trouble Code Chart if any DTCs are output.
  • When DTCs indicating a CAN communication system malfunction are output, first troubleshoot and repair the CAN communication system.
B

GO TO DIAGNOSTIC TROUBLE CODE CHART

C

USE SIMULATION METHOD TO CHECK

A

5.

PROBLEM SYMPTOMS TABLE

(a) Proceed to Problem Symptoms Table.

Click here

Result

Proceed to

Fault is not listed in Problem Symptoms Table

A

Fault is listed in Problem Symptoms Table

B

B

GO TO STEP 7

A

6.

OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Refer to Terminals of ECU.

Click here

(b) Refer to Data List / Active Test.

Click here

NEXT

7.

REPAIR OR REPLACE

NEXT

8.

CONFIRMATION TEST

NEXT

END

    Freeze Frame Data

    Message Not Displayed on Multi-information Display When AUTO Function Set to ON/OFF

    See More:

    Toyota Avalon Service & Repair Manual > Sfi System: Terminals Of Ecm
    TERMINALS OF ECM HINT: The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0202