DESCRIPTION The parking brake ECU (brake actuator assembly) receives the wheel speed signal of each wheel from the skid control ECU (brake booster with master cylinder assembly) via CAN communication. This DTC is stored when a malfunction occurs in the skid control ECU (brake booster with master cylinder assembly).
CAUTION / NOTICE / HINT NOTICE: The parking brake indicator light blinks (red) when the power switch is turned on (IG) after replacing the parking brake ECU (brake actuator assembly). Operate the electric parking brake switch (electric parking brake switch assembly) to turn off the parking brake indicator light (red). PROCEDURE
(a) Check for DTCs. Chassis > ABS/VSC/TRAC > Trouble Codes
(a) Clear the DTCs. Chassis > Electric Parking Brake > Clear DTCs(b) Turn the power switch off. (c) Check for DTCs. Chassis > Electric Parking Brake > Trouble Codes
|
Toyota Avalon Service & Repair Manual > Smart Key System(for Entry Function, Gasoline Model): Open in Outside Luggage Compartment Electrical Key Antenna Circuit (B27A8)
DESCRIPTION The certification ECU (smart key ECU assembly) generates a request signal and transmits the signal to the electrical key antenna (outside luggage compartment). For the electrical key antenna (outside luggage compartment) to detect when the electrical key transmitter sub-assembly is broug ...