PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected.
TROUBLESHOOTING PRECAUTIONS (a) When inspecting the rear brakes, disconnect the connector of the parking brake actuator assembly or disconnect the cable from the negative (-) auxiliary battery terminal. CAUTION:
(b) The electric parking brake may still operate up to 20 seconds after the power switch is turned off. Before disconnecting connectors or fuses, turn the power switch off and wait 20 seconds or more. (c) If a component has been removed and installed, confirm that the system operates normally by checking for DTCs after installation has been completed. HANDLING PRECAUTIONS (a) When tilting the vehicle to perform work after parking the vehicle on a level surface, the braking force may not be sufficient. Make sure to pull the electric parking brake switch (electric parking brake switch assembly) to the lock side 2 times (2 lock operations). HINT:
(b) The parking brake indicator light blinks (red) when the power switch is turned on (IG) after replacing the parking brake ECU (brake actuator assembly). Operate the electric parking brake switch (electric parking brake switch assembly) to turn off the parking brake indicator light (red). PRECAUTIONS FOR TOWING VEHICLES (a) For towing precautions: Click here PARKING BRAKE FORCED RELEASE METHOD (a) For the parking brake forced release method: Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Seat: Seat Heater Switch(for Rear Side)
ComponentsCOMPONENTS ILLUSTRATION *1 CONSOLE BOX ORNAMENT *2 CONSOLE REAR END PANEL SUB-ASSEMBLY *3 SEAT HEATER SWITCH *4 CONSOLE REAR END PANEL InspectionINSPECTION PROCEDURE 1. INSPECT SEAT HEATER SWITCH (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: ...
