INSTALLATION CAUTION / NOTICE / HINT for HV Model:
HINT:
PROCEDURE 1. INSTALL STEERING KNUCKLE (a) Secure the steering knuckle between aluminum plates in a vise. NOTICE: Do not overtighten the vise. (b) Install the front axle hub sub-assembly and front disc brake dust cover to the steering knuckle with the 4 bolts. Torque: 120 N·m {1224 kgf·cm, 89 ft·lbf} NOTICE:
2. INSTALL FRONT LOWER BALL JOINT ASSEMBLY Click here 3. INSTALL FRONT AXLE ASSEMBLY Click here |
Toyota Avalon Service & Repair Manual > Electronically Controlled Brake System(for Gasoline Model): Dtc Check / Clear
DTC CHECK / CLEAR DTC CHECK/CLEAR (When Using TECHSTREAM) (a) Check for DTCs. (1) Turn the engine switch off. (2) Connect the Techstream to the DLC3. (3) Turn the engine switch on (IG). (4) Turn the Techstream on. (5) Read the DTCs following the prompts on the Techstream. Enter the following menus: ...