Toyota Avalon Service & Repair Manual: Inspection

Toyota Avalon Service & Repair Manual / Drivetrain / Drive Shaft / Propeller Shaft / Front Drive Shaft Assembly / Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT DRIVE SHAFT ASSEMBLY

(a) Check that there is no excessive play in the radial direction of the outboard joint.

(b) Check that the inboard joint slides smoothly in the thrust direction.

(d) Check the boots for damage.

(e) Check whether the drive shaft dimension (A) and (B) are within specification.

NOTICE:

Keep the drive shaft assembly level during inspection.

Dimension (A) (for Gasoline Model):

for LH Side	598.75 mm (1.96 ft.)
for RH Side	924.55 mm (3.03 ft.)

Dimension (A) (for HV Model):

for LH Side	604.71 mm (1.98 ft.)
for RH Side	905.65 mm (2.97 ft.)

Dimension (B) (for Gasoline Model):

for LH Side	105.2 to 105.8 mm (4.15 to 4.16 in.)
for RH Side	97.3 to 98.3 mm (3.84 to 3.87 in.)

Dimension (B) (for HV Model):

for LH Side	86.8 to 87.6 mm (3.42 to 3.44 in.)
for RH Side	83.7 to 84.7 mm (3.30 to 3.33 in.)

*A	for LH Side
*B	for RH Side

See More:

Toyota Avalon Service & Repair Manual > Rear Light Assembly: Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. REMOVE REAR LIGHT GASKET (a) Remove the rear light gasket. NOTICE: Be sure to remove all traces of the old rear light gasket from the vehicle body. D ...

Toyota Avalon Service & Repair Manual: Inspection

Disassembly

Installation

See More:

Toyota Avalon Owners Manual

Toyota Avalon Service & Repair Manual