Toyota Avalon Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL MOTOR CABLE

CAUTION:

Be sure to wear insulated gloves.

(a) Using an insulated tool, install the motor cable to the hybrid vehicle transaxle assembly with the 6 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

NOTICE:

  • Keep the motor cable terminals and their installation area free from foreign matter, water, etc.
  • Do not touch the waterproof seal or terminals of the motor cable.

(b) Engage the 2 claws to install a new terminal cap to the hybrid vehicle transaxle assembly.

NOTICE:

  • Keep the terminal cap and its installation area free from foreign matter, water, etc.
  • Do not pinch the O-ring.
  • Check that the terminal cap is securely installed.

(c) Temporarily install the connector cover to the hybrid vehicle transaxle assembly with the 2 bolts.

(d) Tighten the 2 bolts to install the connector cover.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

2. INSTALL INVERTER WITH CONVERTER ASSEMBLY

Click here

    Components

    Removal

    See More:

    Toyota Avalon Service & Repair Manual > Audio And Visual System(for Hv Model): Stereo Component Amplifier Disconnected (B15D3)
    DESCRIPTION The radio and display receiver assembly and stereo component amplifier assembly are connected via AVC-LAN communication line. DTC No. Detection Item DTC Detection Condition Trouble Area B15D3 Stereo Component Amplifier Disconnected When either of the following conditions is met: Stereo c ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0158