DISASSEMBLY PROCEDURE 1. REMOVE SHIFT POSITION INDICATOR
2. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
(e) Using SST, release the locking lug of each terminal and remove the terminal from the connector housing.
SST: 09991-00510 NOTICE: Before removing the terminals, make a note of the color of each wire and position where its terminal is installed. 3. REMOVE LOWER POSITION INDICATOR HOUSING
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Parts Location
PARTS LOCATION ILLUSTRATION *1 FRONT ENGINE MOUNTING INSULATOR *2 REAR ENGINE MOUNTING INSULATOR *3 CANISTER *4 FUEL PUMP (for Low Pressure Side) *5 MASS AIR FLOW METER SUB-ASSEMBLY *6 PARK / NEUTRAL POSITION SWITCH ASSEMBLY *7 VACUUM SWITCHING VALVE (for Active Control Engine Mount System) *8 NO. 1 ...