Toyota Avalon Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

(a) No. 1 transmission shift switch assembly:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (SDN) - 2 (ECC)

"-" (Down shift) shift paddle switch operated and held

Below 13 Ω

"-" (Down shift) shift paddle switch not operated

10 kΩ or higher

1 (SDN) - 3 (ECC1)

"-" (Down shift) shift paddle switch operated and held

Below 13 Ω

"-" (Down shift) shift paddle switch not operated

10 kΩ or higher

If the result is not as specified, replace the No. 1 transmission shift switch assembly.

*a

Component without harness connected

(Shift Paddle Switch (No.1 Transmission Shift Switch Assembly))

(b) No. 2 transmission shift switch assembly:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (SUP) - 2 (ECC)

"+" (Up shift) shift paddle switch operated and held

Below 13 Ω

"+" (Up shift) shift paddle switch not operated

10 kΩ or higher

If the result is not as specified, replace the No. 2 transmission shift switch assembly.

*a

Component without harness connected

(Shift Paddle Switch (No.2 Transmission Shift Switch Assembly))

    Components

    Installation

    See More:

    Toyota Avalon Service & Repair Manual > Front Camera System(for Gasoline Model): Terminals Of Ecu
    TERMINALS OF ECU NOTICE: DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the Techstream once the inspection has been completed. Do not apply excessive force to the O5 forward recognition camera connector. CHECK FORWARD RECOGNITION CAM ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0148