INSTALLATION PROCEDURE 1. INSTALL NO. 1 SWITCH WIRE HINT: Perform this procedure only when replacement of the No. 1 switch wire is necessary. (a) Engage the 2 guides to install the No. 1 switch wire to the steering wheel assembly. 2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (a) Connect the No. 1 transmission shift switch assembly connector and No. 2 transmission shift switch assembly connector to install the No. 1 transmission shift switch assembly and No. 2 transmission shift switch assembly to the No. 1 switch wire. (b) Engage the 2 clamps. (c) Engage the 4 claws to install the shift paddle switch (transmission shift switch assembly) to the steering wheel assembly. (d) Install 2 new screws. Torque: 1.7 N·m {17 kgf·cm, 15 in·lbf} 3. INSTALL STEERING PAD SWITCH ASSEMBLY Click here 4. INSTALL STEERING WHEEL ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Dynamic Radar Cruise Control System(for Gasoline Model): Diagnosis System
DIAGNOSIS SYSTEM DIAGNOSIS FUNCTION (a) The diagnosis function turns off the cruise control indicator, illuminates the master warning light and displays a warning message when a malfunction is detected. When a malfunction is detected in the dynamic radar cruise control system, DTCs are stored in the ...