INSTALLATION PROCEDURE 1. INSTALL BATTERY (a) Install the battery to the vehicle. (b) Install the No. 2 battery clamp to the battery clamp sub-assembly with the bolt. 
Torque: 18.5 N·m {189 kgf·cm, 14 ft·lbf} (c) Connect the cable to the positive (+) battery terminal and tighten the nut. Torque: 5.4 N·m {55 kgf·cm, 48 in·lbf} (d) Engage the 2 claws to install the battery terminal cap to the positive (+) battery terminal. 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (a) Connect the cable to the negative (-) battery terminal and tighten the nut. Torque: 5.4 N·m {55 kgf·cm, 48 in·lbf} NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Seat Cushion Heater: Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the seat frame may injure your hands. PROCEDURE 1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY (a) Install the rear seat cushion heater assembly to the bench type rear seat cushion cover with 19 new tag pins. 2. INSTA ...
