Components COMPONENTS ILLUSTRATION
Installation INSTALLATION PROCEDURE 1. INSTALL V-RIBBED BELT HINT: When reusing the V-ribbed belt, check the ribs and back of the V-ribbed belt for wear and cracks. If wear or a crack that reaches the core (at more than 1 point) is found, replace the V-ribbed belt.
(b) Turn the V-ribbed belt tensioner assembly counterclockwise and remove the 5 mm hexagon wrench.
2. INSTALL FRONT FENDER APRON SEAL RH Click here 3. INSTALL FRONT WHEEL RH Click here Removal REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL RH Click here 2. REMOVE FRONT FENDER APRON SEAL RH Click here 3. REMOVE V-RIBBED BELT
(b) Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly. (c) Remove the V-ribbed belt from the V-ribbed belt tensioner assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Crossing Traffic Alert Buzzer: Components
COMPONENTS ILLUSTRATION *A for HV Model - - *1 LUGGAGE TRIM SERVICE HOLE COVER - - ILLUSTRATION *A w/ Seat Heater System - - *1 SPARE WHEEL COVER ASSEMBLY - - ILLUSTRATION *A for Gasoline Model *B for HV Model *C w/ Seat Heater System - - *1 LUGGAGE COMPARTMENT INNER TRIM PAD *2 REAR CENTER SEAT OUT ...