INSTALLATION PROCEDURE 1. INSTALL NO. 1 SWITCH WIRE HINT: Perform this procedure only when replacement of the No. 1 switch wire is necessary. (a) Engage the 2 guides to install the No. 1 switch wire to the steering wheel assembly. 2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (a) Connect the No. 1 transmission shift switch assembly connector and No. 2 transmission shift switch assembly connector to install the No. 1 transmission shift switch assembly and No. 2 transmission shift switch assembly to the No. 1 switch wire. (b) Engage the 2 clamps. (c) Engage the 4 claws to install the shift paddle switch (transmission shift switch assembly) to the steering wheel assembly. (d) Install 2 new screws. Torque: 1.7 N·m {17 kgf·cm, 15 in·lbf} 3. INSTALL STEERING PAD SWITCH ASSEMBLY Click here 4. INSTALL STEERING WHEEL ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Dynamic Radar Cruise Control System(for Gasoline Model): Definition Of Terms
DEFINITION OF TERMS Term Definition Monitor description Description of what the ECM monitors and how it detects malfunctions (monitoring purpose and details). Related DTCs Group of diagnostic trouble codes that are output by the ECM based on the same malfunction detection logic. Typical enabling con ...