Components COMPONENTS ILLUSTRATION
Installation INSTALLATION PROCEDURE 1. INSTALL TRANSMISSION REVOLUTION SENSOR (NC) (a) Install the transmission revolution sensor (NC) and spacer to the counter drive gear sub-assembly with the bolt. Torque: 5.4 N·m {55 kgf·cm, 48 in·lbf} 2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT) (a) Install the transmission revolution sensor (NT) to the automatic transaxle case sub-assembly with the bolt. Torque: 5.4 N·m {55 kgf·cm, 48 in·lbf} 3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Click here Removal REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transmission revolution sensor (NT) and transmission revolution sensor (NC) removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/Replaced
PROCEDURE 1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY Click here 2. REMOVE TRANSMISSION REVOLUTION SENSOR (NT)
3. REMOVE TRANSMISSION REVOLUTION SENSOR (NC)
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Tire Pressure Warning System(for Gasoline Model): Auto ID Under Registration (C2128)
DESCRIPTION When ID registration is being performed via the automatic ID registration function, the tire pressure warning ECU and receiver stores C2128 and the tire pressure warning light flashes for 1 minute and then illuminates. When the tire pressure warning ECU receives data from all registered ...