Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE MANUAL VALVE

(a) Remove the manual valve from the transmission valve body assembly.

2. REMOVE SOLENOID LOCK PLATE

(a) Remove the 3 bolts and solenoid lock plate from the transmission valve body assembly.

3. REMOVE SOLENOID (SLU) VALVE

(a) Remove the solenoid (SLU) valve from the transmission valve body assembly.

4. REMOVE SOLENOID (SL5) VALVE

(a) Remove the solenoid (SL5) valve from the transmission valve body assembly.

5. REMOVE SOLENOID (SL6) VALVE

(a) Remove the solenoid (SL6) valve from the transmission valve body assembly.

6. REMOVE SOLENOID (SL4) VALVE

(a) Remove the solenoid (SL4) valve from the transmission valve body assembly.

7. REMOVE SOLENOID (SL3) VALVE

(a) Remove the solenoid (SL3) valve from the transmission valve body assembly.

8. REMOVE SOLENOID (SL1) VALVE

(a) Remove the solenoid (SL1) valve from the transmission valve body assembly.

9. REMOVE SOLENOID (SL2) VALVE

(a) Remove the solenoid (SL2) valve from the transmission valve body assembly.

10. REMOVE SOLENOID (SLT) VALVE

(a) Remove the solenoid (SLT) valve from the transmission valve body assembly.

11. REMOVE SOLENOID (SL) VALVE

(a) Remove the bolt and solenoid (SL) valve from the transmission valve body assembly.

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sliding Roof System(for Gasoline Model): Terminals Of Ecu
TERMINALS OF ECU CHECK SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) (a) Disconnect the O3 sliding roof ECU (sliding roof drive gear assembly) connector. (b) Measure the resistance and voltage according to the value(s) in the table below. HINT: Measure the values on the wire harness side with ...

Toyota Avalon (XX50) 2019-2022 Owners Manual