Components COMPONENTS ILLUSTRATION
ILLUSTRATION
Replacement REPLACEMENT CAUTION / NOTICE / HINT NOTICE:
HINT: If any work is performed on the brake system or if air in the brake lines is suspected, bleed the brake system. PROCEDURE 1. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
2. FILL RESERVOIR WITH BRAKE FLUID (a) Fill the reservoir with brake fluid. Brake Fluid: SAE J1703 or FMVSS No. 116 DOT3 SAE J1704 or FMVSS No. 116 DOT4 NOTICE:
3. REPLACE BRAKE FLUID (a) Remove the bleeder plug cap. (b) Connect a vinyl tube to the bleeder plug. (c) Depress the brake pedal several times, and then loosen the bleeder plug with the pedal depressed.*1 (d) When fluid stops coming out, tighten the bleeder plug and release the brake pedal.*2 (e) Repeat steps *1 and *2 until new brake fluid comes out. (f) Tighten the bleeder plug completely. Torque: 8.3 N·m {85 kgf·cm, 73 in·lbf} (g) Install the bleeder plug cap. (h) Repeat the above steps to replace the brake fluid of the brake lines for each wheel. 4. INSPECT FOR BRAKE FLUID LEAK 5. INSPECT BRAKE FLUID LEVEL IN RESERVOIR Click here 6. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY (a) Install the brake master cylinder reservoir filler cap assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Audio And Visual System(for Hv Model): Voice Guidance does not Function
CAUTION / NOTICE / HINT NOTICE: Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System. Click here When replacing the radio and display receiver assembly, ...