INSPECTION PROCEDURE 1. INSPECT CANISTER (CHARCOAL CANISTER ASSEMBLY)
(b) Check canister (charcoal canister assembly) operation.
(c) Check for air leaks.
(2) With the purge line port and air line port closed, apply 20 kPa (150 mmHg, 5.91 in. Hg) of pressurized air into the vent line port, then confirm that pressure is maintained for 1 minute. If the result is not as specified, replace the canister (charcoal canister assembly). 2. INSPECT NO. 2 CHARCOAL CANISTER SUB-ASSEMBLY
(b) Check No. 2 charcoal canister sub-assembly operation.
(c) Check for air leaks.
(2) With the port B and leak detection pump sub-assembly connector closed, apply 20 kPa (150 mmHg, 5.91 in. Hg) of pressurized air into the port A, then confirm that pressure is maintained for 1 minute. If the result is not as specified, replace the No. 2 charcoal canister sub-assembly. (d) Check the leak detection pump sub-assembly.
(2) Check that a clicking sound is heard from the leak detection pump sub-assembly. If the result is not as specified, replace the leak detection pump sub-assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Steering Knuckle: Installation
INSTALLATION CAUTION / NOTICE / HINT for HV Model: When removing or installing the front disc brake caliper assembly, pushing back the disc brake piston may cause a large clearance between the brake pads and brake disc. When the brake pedal is depressed with a large clearance between the brake pads ...