ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Engine / Data List / Accelerator Position Sensor No. 1 Voltage and Accelerator Position Sensor No. 2 Voltage. Powertrain > Engine > Data List
(e) Read the values displayed on the Techstream. Standard Voltage:
If the result is not as specified, check the accelerator pedal sensor assembly, wire harness and ECM. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Seat Reclining Control Cable: Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the seat frame may injure your hands. PROCEDURE 1. INSTALL REAR SEATBACK LOCK ASSEMBLY LH (a) Install the rear seatback lock assembly LH with the 2 nuts. Torque: 18 N·m {184 kgf·cm, 13 ft·lbf} (b) Engage the guid ...