INSTALLATION PROCEDURE 1. INSTALL FRONT ENGINE MOUNTING INSULATOR (a) Install the stay to the front engine mounting insulator with the nut. Torque: 6.0 N·m {61 kgf·cm, 53 in·lbf} (b) Install the front engine mounting insulator to the front frame assembly with the 3 nuts. Torque: 72 N·m {734 kgf·cm, 53 ft·lbf}
(d) Install the front engine mounting bracket to the front engine mounting insulator with the bolt. Torque: Bolt (D) : 72 N·m {734 kgf·cm, 53 ft·lbf} (e) Connect the vacuum hose to the front engine mounting insulator. (f) Engage the 2 clamps to install the vacuum hoses to the front engine mounting insulator. 2. INSTALL REAR ENGINE UNDER COVER LH Click here 3. INSTALL NO. 1 ENGINE UNDER COVER Click here 4. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH Click here 5. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH Click here 6. INSTALL V-BANK COVER SUB-ASSEMBLY Click here 7. INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System) Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Power Steering System(for Hv Model): Assist Map Number Un-Writing (C1581)
DESCRIPTION This DTC will be stored if the power steering ECU (rack and pinion power steering gear assembly) determines that the assist map is not written in the ECU. DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition Note C1581 Assist Map Number ...