Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT AIR FUEL RATIO SENSOR (for Bank 1)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (HA1A) - 2 (+B)

20°C (68°F)

1.6 to 3.2 Ω

1 (HA1A) - 4 (A1A-)

Always

10 kΩ or higher

If the result is not as specified, replace the air fuel ratio sensor.

*a

Component without harness connected

(Air Fuel Ratio Sensor)

2. INSPECT AIR FUEL RATIO SENSOR (for Bank 2)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (HA2A) - 2 (+B)

20°C (68°F)

1.6 to 3.2 Ω

1 (HA2A) - 4 (A2A-)

Always

10 kΩ or higher

If the result is not as specified, replace the air fuel ratio sensor.

*a

Component without harness connected

(Air Fuel Ratio Sensor)

    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Front Evaporator Temperature Sensor: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during No. 1 cooler thermistor removal/installation are shown below. Necessary Procedure After Parts Removed/In ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0197