Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Removal

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / General / Maintenance / Brake Vacuum Hose(for Gasoline Model) / Removal

REMOVAL

PROCEDURE

1. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

Click here

2. REMOVE FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY

Click here

3. REMOVE UNION TO CHECK VALVE HOSE

(a) Disengage the clamp to separate the union to check valve hose from the air tube.

(b) Slide the clip and disconnect the union to check valve hose from the brake booster assembly.

(c) Slide the clip and disconnect the union to check valve hose from the air delivery way.

(d) Remove the 2 clips from the union to check valve hose.

4. REMOVE AIR TUBE

(a) Disconnect the 2 vacuum transmitting hose assemblies from the air delivery way.

(b) Slide the clip and disconnect the air tube from the vacuum pump assembly.

(c) Slide the clip and disconnect the air tube from the air delivery way.

(d) Remove the 2 clips from the air tube.

(e) Disengage the clamp to remove the air delivery way from the intake air surge tank assembly.
    Installation

    Coolant(for Inverter)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Oil Level Sensor: Inspection
    INSPECTION PROCEDURE 1. INSPECT ENGINE OIL LEVEL SENSOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - Engine oil level sensor body ON Below 1 Ω OFF 10 kΩ or higher If the result is not as specified, ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.1394