INSTALLATION PROCEDURE 1. INSTALL KNOCK CONTROL SENSOR HINT: Perform "Inspection After Repair" after replacing a knock control sensor. Click here (a) Temporarily install the 2 knock control sensors to the cylinder block sub-assembly with the 2 bolts so that the knock control sensor installation position is as shown in the illustration.
NOTICE:
(c) Using a 10 mm union nut wrench, tighten the bolt (B). Torque: Specified tightening torque : 20 N·m {204 kgf·cm, 15 ft·lbf} HINT:
(d) Connect the 2 knock control sensor connectors. 2. INSTALL FUEL DELIVERY PIPE Click here 3. PERFORM INITIALIZATION (a) Perform "Inspection After Repair" after replacing a knock control sensor. Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Wiper And Washer System(for Gasoline Model): Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE: Before replacing the main body ECU (multiplex network body ECU), refer to Registration. Click here HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in orde ...