INSTALLATION CAUTION / NOTICE / HINT NOTICE:
HINT:
PROCEDURE 1. INSTALL FRONT FLEXIBLE HOSE NOTICE: When installing the front flexible hose, minimize twisting of the hose.
(b) Using a union nut wrench, connect the brake line to the front flexible hose while holding the front flexible hose with a wrench. Torque: Specified tightening torque : 15.2 N·m {155 kgf·cm, 11 ft·lbf} NOTICE:
HINT:
(c) Engage the 2 hooks to install the front speed sensor clamp bracket. NOTICE: Do not twist the front speed sensor wire harness when installing it.
(e) Connect the front flexible hose to the front disc brake cylinder assembly with a new union bolt and a new gasket. Torque: 29.4 N·m {300 kgf·cm, 22 ft·lbf} NOTICE:
2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for HV Model) (a) Connect the reservoir level switch connector. (b) Connect the cable to the negative (-) auxiliary battery terminal. Click here 3. BLEED BRAKE LINE for Gasoline Model: Click here for HV Model: Click here 4. INSTALL FRONT WHEEL Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Air Conditioning System(for Gasoline Model): Air Vent cannot be Switched
DESCRIPTION If the air outlet mode does not change even though the air outlet display changes, the following factors may be the cause. Symptom Factor Air outlet mode cannot be changed (air outlet display changes) No. 1 air conditioning radiator damper servo sub-assembly malfunction Damper link disco ...