ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY (a) Check the idle speed. (1) Start the engine and check that the MIL is not illuminated. After the engine is warmed up, check that the idle speed is within the specified range with the A/C switch off. Standard Idle Speed: 600 to 700 rpm NOTICE:
(2) Perform a road test and confirm that there are no abnormalities. (b) Inspect the throttle position sensor. (1) Connect the Techstream to the DLC3. (2) Start the engine. (3) Turn the Techstream on. (4) Enter the following menus: Powertrain / Engine / Data List / Throttle Position Sensor No.1 Voltage %. Powertrain > Engine > Data List
(5) Fully depress the accelerator pedal and check that the value is 60% or higher. If the percentage is less than 60%, check the throttle body with motor assembly, wire harness and ECM. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Hv Model): Abnormal Brake Pedal Response on First Depression
DESCRIPTION If the vehicle has been stopped without opening or closing the driver door for a long period of time, the electronically controlled brake system will not be ready and sufficient fluid pressure may not be stored in the accumulator. In this case, the brake pedal response may not be the sam ...
