INSTALLATION PROCEDURE 1. INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System) (a) Install the vacuum switching valve (for active control engine mount system) to the front engine mounting insulator with the nut. Torque: 6.0 N·m {61 kgf·cm, 53 in·lbf} (b) Connect the 3 vacuum hoses to the vacuum switching valve (for active control engine mount system). (c) Engage the wire harness clamp and connect the vacuum switching valve (for active control engine mount system) connector. (d) Install the 2 bolts. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (e) Engage the wire harness clamp and install the engine wire with the bolt. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} 2. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE Click here 3. INSTALL INLET AIR CLEANER ASSEMBLY Click here 4. INSTALL COOL AIR INTAKE DUCT SEAL Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Exterior Panels / Trim: Rocker Panel Moulding
ComponentsCOMPONENTS ILLUSTRATION *1 FRONT ROCKER PANEL MOULDING END COVER *2 ROCKER PANEL MOULDING ASSEMBLY *3 GROMMET *4 CLIP *5 ROCKER PANEL MOULDING - - ● Non-reusable part - - InstallationINSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The follo ...