REPLACEMENT PROCEDURE 1. REPLACE STRAIGHT PIN NOTICE: If a straight pin is deformed, replace it. (a) Using a plastic hammer, tap in new straight pins to the cylinder block sub-assembly.
Standard Protrusion Height:
2. REPLACE STUD BOLT NOTICE: If a stud bolt is deformed or its threads are damaged, replace it. (a) Using E8 and E10 "TORX" socket wrenches, install the stud bolts to the cylinder block sub-assembly.
Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} 3. REPLACE CONNECTING ROD SMALL END BUSH
(e) Coat the piston pin with engine oil, and push it into the connecting rod with your thumb. HINT: Check that the piston pin fits at a normal room temperature. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > 2gr-fks Intake / Exhaust: Intake Air Control Valve(for Acis)
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT INTAKE AIR CONTROL VALVE (for ACIS) (a) Remove the V-bank cover sub-assembly. Click here (b) Disconnect the vacuum hose sub-assembly from the intake air control valve (for ACIS). (c) Connect a hose and vacuum pump to the intake air con ...