REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fuel pressure sensor (fuel delivery pipe with sensor assembly LH) removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/Replaced
CAUTION:
PROCEDURE 1. REMOVE FUEL PRESSURE SENSOR (FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY LH) Click here NOTICE:
2. REMOVE FUEL PIPE PLUG SUB-ASSEMBLY
(b) Using a 5 mm hexagon socket wrench, remove the 2 bolts, gasket and fuel pipe plug sub-assembly from the fuel delivery pipe with sensor assembly LH. (c) Remove the dust cap sub-assembly from the fuel pipe plug sub-assembly. (d) Remove the O-ring, No. 1 fuel injector back-up ring, No. 2 fuel injector back-up ring and No. 3 fuel injector back-up ring from the fuel pipe plug sub-assembly. (e) Remove the fuel delivery pipe with sensor assembly LH from the vise. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lighting System(for Hv Model Without Cornering Light): Customize Parameters
CUSTOMIZE PARAMETERS CUSTOMIZE LIGHTING SYSTEM (EXT) (for HV Model without Cornering Light) NOTICE: When the customer requests a change in a function, first make sure that the function can be customized. Be sure to make a note of the current settings before customizing. When troubleshooting a functi ...