REASSEMBLY PROCEDURE 1. INSTALL FUEL PUMP HINT: Perform "Inspection After Repair" after replacing the fuel pump. Click here
(f) Check the connection state of the fuel pump harness. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, reconnect the fuel pump harness to the fuel pump so that the ground terminal of the fuel pump harness is securely connected to the fuel pump body. (g) Engage the 2 claws to install the fuel filter to the fuel sub-tank. NOTICE:
(i) Engage the clamp to connect the fuel pump harness to the fuel suction plate sub-assembly. (j) Connect the 2 fuel pump harness connectors. (k) Install the harness protector to the fuel pump harness. 2. INSTALL FUEL SENDER GAUGE ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Front Stabilizer Bar: Installation
INSTALLATION PROCEDURE 1. INSTALL FRONT NO. 1 STABILIZER BAR BUSHING (for LH Side) (a) Install the front No. 1 stabilizer bar bushing to the front stabilizer bar as shown in the illustration. *a Cutout *b Stopper Ring Front of the Vehicle Outside of the Vehicle NOTICE: Install the front No. 1 stabil ...