INSTALLATION PROCEDURE 1. INSTALL FUEL SENDER GAUGE ASSEMBLY (a) Engage the claw to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly. NOTICE: Be careful not to bend the arm of the fuel sender gauge assembly. (b) Engage the 2 clamps to connect the wire harness to the fuel suction plate sub-assembly. NOTICE: Do not damage the wire harness. (c) Connect the fuel sender gauge assembly connector. 2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Ultrasonic Sensor(for Rear): Components
COMPONENTS ILLUSTRATION *1 REAR CENTER ULTRASONIC SENSOR *2 REAR CENTER ULTRASONIC SENSOR RETAINER *3 REAR CORNER ULTRASONIC SENSOR *4 REAR CORNER ULTRASONIC SENSOR RETAINER *5 ULTRASONIC SENSOR CLIP - - ● Non-reusable part - - ...