INSTALLATION PROCEDURE 1. INSTALL ENGINE OIL LEVEL SENSOR (a) Install the engine oil level sensor to the oil pan sub-assembly with the 2 nuts. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (b) Install a new clip to the engine oil level sensor. 2. INSTALL OIL STRAINER SUB-ASSEMBLY Click here
3. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY Click here 4. REMOVE ENGINE ASSEMBLY FROM ENGINE STAND Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Door Opening Trim Weatherstrip: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP (a) Align the alignment mark on the rear door opening trim weatherstrip with the flange on the vehicle b ...
