Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT FENDER APRON SEAL RH

Click here

2. DRAIN ENGINE OIL

Click here

3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Disengage the clamp to disconnect the wire harness protector.

*1

Wire Harness Protector

(b) Disconnect the engine oil pressure switch assembly connector.

(c) Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.

    Installation

    Oil Pump

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electric Parking Brake System(for Hv Model): Brake System Malfunction (C13A9)
    DESCRIPTION The parking brake ECU (brake actuator assembly) receives the wheel speed signal of each wheel from the skid control ECU (brake booster with master cylinder assembly) via CAN communication. This DTC is stored when a malfunction occurs in the skid control ECU (brake booster with master cyl ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.016