INSTALLATION PROCEDURE 1. INSTALL STARTER ASSEMBLY (a) Install the starter assembly with the 2 bolts. Torque: 46 N·m {469 kgf·cm, 34 ft·lbf} (b) Connect the engine wire to the terminal 30 with the nut. Torque: 9.8 N·m {100 kgf·cm, 87 in·lbf} (c) Close the terminal cap. (d) Connect the starter assembly connector. 2. INSTALL BATTERY CLAMP SUB-ASSEMBLY Click here 3. INSTALL ECM Click here 4. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE Click here 5. INSTALL INLET AIR CLEANER ASSEMBLY Click here 6. INSTALL V-BANK COVER SUB-ASSEMBLY Click here 7. INSTALL COOL AIR INTAKE DUCT SEAL Click here 8. INSTALL BATTERY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Outer Rear View Mirror: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during outer rear view mirror assembly with cover removal/installation are shown below. Necessary Procedure Af ...