Toyota Avalon Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL FUEL TANK PRESSURE SENSOR (VAPOR PRESSURE SENSOR ASSEMBLY)

(a) Push the fuel tank pressure sensor (vapor pressure sensor assembly) onto the fuel tank assembly, then install the tube joint clip.

NOTICE:

  • Check that there are no scratches or foreign matter around the connecting parts of the fuel tank pressure sensor (vapor pressure sensor assembly) and fuel suction plate sub-assembly before performing this work.
  • Check that the fuel suction plate sub-assembly is securely inserted to the end of the fuel tank pressure sensor (vapor pressure sensor assembly).
  • Check that the tube joint clip is on the collar of the fuel tank pressure sensor (vapor pressure sensor assembly).
  • After installing the tube joint clip, check that the fuel tank pressure sensor (vapor pressure sensor assembly) cannot be pulled out.

*1

Tube Joint Clip

*a

O-ring

*b

Collar

2. INSTALL REAR FLOOR SERVICE HOLE COVER

Click here

3. INSTALL REAR SEAT ASSEMBLY

Click here

    Components

    Removal

    See More:

    Toyota Avalon Service & Repair Manual > Audio And Visual System(for Gasoline Model): XM Tuner Antenna Disconnected (B15FE,B15FF)
    DESCRIPTION These DTCs are stored when a malfunction occurs in the telephone antenna assembly which is connected to the radio and display receiver assembly. DTC No. Detection Item DTC Detection Condition Trouble Area B15FE XM Tuner Antenna Disconnected The telephone antenna assembly is not connected ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0164