Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Put the engine in Inspection Mode (Maintenance Mode).

Powertrain > Hybrid Control > Utility

Tester Display

Inspection Mode

(e) Check the PCV valve (ventilation valve sub-assembly) operation.

(1) Start the engine.

(2) Slide the clip and disconnect the No. 2 ventilation hose from the air cleaner hose assembly.

(3) Check that air is sucked into the No. 2 ventilation hose.

Standard:

Air is sucked into the No. 2 ventilation hose.

If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

    Installation

    Removal

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Terminals Of Ecm
    TERMINALS OF ECM HINT: The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0136