Components COMPONENTS ILLUSTRATION
Installation INSTALLATION CAUTION / NOTICE / HINT NOTICE: This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts. Click here PROCEDURE 1. INSTALL E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR) (a) Using an 8 mm socket wrench, install the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) to the intake manifold with the bolt. Torque: 5.0 N·m {51 kgf·cm, 44 in·lbf} (b) Connect the vacuum hose to the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor). (c) Connect the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) connector. Removal REMOVAL CAUTION / NOTICE / HINT NOTICE: This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts. Click here PROCEDURE 1. REMOVE E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR)
(b) Disconnect the vacuum hose from the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor). (c) Using an 8 mm socket wrench, remove the bolt and E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) from the intake manifold. |
Toyota Avalon Service & Repair Manual > Lane Departure Alert System (w/ Steering Control)(for Gasoline Model): Driving Support ECU (C1A01)
DESCRIPTION If the forward recognition camera detects a malfunction in the internal circuit of the driving support ECU assembly, DTC C1A01 is stored. DTC No. Detection Item DTC Detection Condition Trouble Area C1A01 Driving Support ECU 2 seconds after the engine switch is turned on (IG), a malfuncti ...