ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT COOLING FAN SYSTEM CAUTION: To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fan when inspecting the cooling fan system. (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Engine / Active Test / Control the Engine Cooling Fan Duty Ratio. Powertrain > Engine > Active Test
(e) Check the operation of the cooling fan while operating it using the Techstream. OK:
If the cooling fan motor (fan with motor assembly) does not operate, check the cooling fan circuit. Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Vehicle Approaching Speaker Ecu: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during vehicle approaching speaker controller removal/installation are shown below. Necessary Procedure After ...