INSTALLATION PROCEDURE 1. INSTALL FLOW SHUTTING VALVE (WATER BY-PASS HOSE ASSEMBLY)
(b) Connect the flow shutting valve (water by-pass hose assembly) with the bolt. Torque: 19 N·m {194 kgf·cm, 14 ft·lbf} (c) Connect the No. 2 water by-pass pipe sub-assembly with the bolt. Torque: 19 N·m {194 kgf·cm, 14 ft·lbf} (d) Connect the inlet heater hose connector to the flow shutting valve (water by-pass hose assembly). NOTICE: Check that there is no damage or foreign matter on the connecting parts of the water lines.
(2) Push in the retainer.
(3) Check that the flow shutting valve (water by-pass hose assembly) and inlet heater hose connector are securely connected by pulling on them. (e) Connect the outlet heater hose connector to the No. 2 water by-pass pipe sub-assembly. NOTICE: Check that there is no damage or foreign matter on the connecting parts of the water lines.
(2) Push in the retainer.
(3) Check that the No. 2 water by-pass pipe sub-assembly and outlet heater hose connector are securely connected by pulling on them. (f) Connect the flow shutting valve (water by-pass hose assembly) connector. 2. INSTALL INVERTER WITH CONVERTER ASSEMBLY Click here 3. ADD ENGINE COOLANT (for Engine) Click here 4. INSPECT FOR COOLANT LEAK (for Engine) Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Airbag System(for Gasoline Model): Side Airbag Sensor Assembly No.2 (RH) (B162A)
DESCRIPTION The side collision sensor RH circuit (bus 2) consists of the airbag ECU assembly and side No. 1 airbag sensor RH. The side No. 1 airbag sensor RH detects impacts to the vehicle and sends signals to the airbag ECU assembly to determine if the airbags and pretensioners should be deployed. ...