INSTALLATION CAUTION / NOTICE / HINT NOTICE: This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts. Click here
PROCEDURE 1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY (a) Install a new gasket to the water inlet with thermostat sub-assembly. HINT: Be sure to clean the contact surfaces. (b) Using an 8 mm socket wrench, install the water inlet with thermostat sub-assembly with the 2 bolts. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (c) Connect the No. 7 water by-pass hose to the water inlet with thermostat sub-assembly and slide the clip to secure it. (d) Connect the water inlet with thermostat sub-assembly connector. 2. CONNECT NO. 2 RADIATOR HOSE Click here 3. ADD ENGINE COOLANT (for Engine) Click here 4. INSPECT FOR COOLANT LEAK (for Engine) Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Power Window Regulator Motor(for Front Door): Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. PRECAUTION NOTICE: After turning the engine switch (for Gasoline Model) or power switch (for HV Model) off, waiting time may be required before disc ...
