REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during stereo component equalizer assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing. Click here Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing. Click here PROCEDURE 1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Click here 2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Click here 3. REMOVE STEREO COMPONENT EQUALIZER ASSEMBLY
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Condenser: Installation
INSTALLATION PROCEDURE 1. INSTALL COOLER CONDENSER ASSEMBLY (a) Engage the 2 guides and 2 claws to install the cooler condenser assembly as shown in the illustration. Install in this Direction NOTICE: Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condens ...