REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during engine water pump assembly (water inlet housing) removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/Replaced
NOTICE: This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts. Click here PROCEDURE 1. REMOVE INTAKE MANIFOLD Click here 2. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY Click here 3. REMOVE ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING)
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Steering Column: Multiplex Tilt And Telescopic Ecu
ComponentsCOMPONENTS ILLUSTRATION *1 LOWER STEERING COLUMN COVER *2 MULTIPLEX TILT AND TELESCOPIC ECU InstallationINSTALLATION PROCEDURE 1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU (a) Engage the 2 claws to install the multiplex tilt and telescopic ECU. Install in this direction (b) Connect the co ...