INSTALLATION CAUTION / NOTICE / HINT NOTICE: This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts. Click here PROCEDURE 1. INSTALL O-RING HINT: Perform this procedure only when replacement of the O-ring is necessary. (a) Clean the O-ring groove of the cam timing oil control solenoid assembly. NOTICE: Make sure the O-ring groove is free of foreign matter. (b) Install a new O-ring to the cam timing oil control solenoid assembly. NOTICE: Do not damage the O-ring when installing it. 2. INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
(b) Using an 8 mm socket wrench, install the cam timing oil control solenoid assembly to the No. 2 timing chain cover assembly with 2 new bolts. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} NOTICE:
(c) Connect the cam timing oil control solenoid assembly connector. 3. INSPECT FOR ENGINE OIL LEAK Click here 4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Start Function, Hv Model): Power Source Mode does not Change to ON (ACC)
DESCRIPTION If the power switch is pressed with the electrical key transmitter sub-assembly in the cabin, the certification ECU (smart key ECU assembly) receives a signal and changes the power source mode. Related Data List and Active Test Items Problem Symptom Data List and Active Test Power source ...