ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT CAM TIMING OIL CONTROL SOLENOID ASSEMBLY (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Put the engine in Inspection Mode (Maintenance Mode). Powertrain > Hybrid Control > Utility
(e) Start the engine. (f) Enter the following menus: Powertrain / Engine / Active Test / Control the Exhaust VVT OCV Duty Ratio Bank 1. Powertrain > Engine > Active Test
(g) According to the display on the Techstream, perform the Active Test and check the engine speed while operating the cam timing oil control solenoid assembly. Standard Condition:
HINT:
If the result is not as specified, check the cam timing oil control solenoid assembly, wire harness and ECM. |
Toyota Avalon Service & Repair Manual > Audio And Visual System(for Gasoline Model): Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter
DESCRIPTION The stereo jack adapter assembly sends the sound signal from an external device to the radio and display receiver assembly via this circuit. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - STEREO JACK ADAPTER ASSEMBLY) (a) Disconnect the G3 ...