REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during cam timing control motor with EDU assembly removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/Replaced
NOTICE:
PROCEDURE 1. REMOVE LUGGAGE TRIM SERVICE HOLE COVER Click here 2. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL Click here 3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Click here 4. REMOVE CAM TIMING CONTROL MOTOR WITH EDU ASSEMBLY
(b) Remove the 3 bolts and cam timing control motor with EDU assembly from the No. 2 timing chain cover assembly. NOTICE: If the cam timing control motor with EDU assembly has been struck or dropped, replace it. 5. REMOVE CAM TIMING CONTROL MOTOR O-RING
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Window Defogger System(for Gasoline Model): System Description
SYSTEM DESCRIPTION GENERAL (a) The rear window defogger wire (back window glass) is attached to the inside of the rear window and defogs the window surface quickly when the rear window defogger switch is pressed. The indicator light on the switch illuminates while the system is operating. This syste ...