REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during engine coolant temperature sensor removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/Replaced
PROCEDURE 1. DRAIN ENGINE COOLANT (for Engine) Click here 2. REMOVE COOL AIR INTAKE DUCT SEAL Click here 3. REMOVE INLET AIR CLEANER ASSEMBLY Click here 4. REMOVE NO. 2 ENGINE COOLANT TEMPERATURE SENSOR
5. REMOVE CONVERTER WITH INVERTER ASSEMBLY Click here 6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: VIN Not Programmed (P063051)
MONITOR DESCRIPTION DTC P063051 is stored when the Vehicle Identification Number (VIN) is not stored in the ECM or the stored VIN is not accurate. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P063051 VIN Not Programmed Either of the following conditions is met (1 trip ...