Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL TEMPERATURE SENSOR

(a) Install a new gasket to the engine oil temperature sensor.

(b) Using SST, install the engine oil temperature sensor to the cylinder block sub-assembly.

SST: 09817-33191

Torque:

19.6 N·m {200 kgf·cm, 14 ft·lbf}

NOTICE:

If the engine oil temperature sensor has been struck or dropped, replace it.

(c) Connect the engine oil temperature sensor connector.

2. CHECK ENGINE OIL LEVEL

Click here

3. INSPECT FOR ENGINE OIL LEAK

Click here

4. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Click here

5. INSTALL NO. 1 ENGINE UNDER COVER

Click here

6. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Click here

7. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

Click here

    Inspection

    Removal

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Front Power Seat Control System(for Gasoline Model With Memory): How To Proceed With Troubleshooting
    CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the front power seat control system (w/ Memory). *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT 2. CUSTOMER PROBLEM ANALYSIS (a) Interview the customer to confirm the problem. Click here NEXT 3. PRE-CHECK ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0173