Toyota Avalon Service & Repair Manual: Power Source Circuit

DESCRIPTION

This circuit is the power source circuit for the stereo component equalizer assembly.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses and relays for circuits related to this system before performing the following procedure.

PROCEDURE

1.

CHECK HARNESS AND CONNECTOR (STEREO COMPONENT EQUALIZER ASSEMBLY - BATTERY [+B, IGN] AND BODY GROUND)

(a) Disconnect the stereo component equalizer assembly connector.

*a

Front view of wire harness connector

(to Stereo Component Equalizer Assembly)

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection

Condition

Specified Condition

G68-14 (+B) - Body ground

Always

11 to 14 V

G68-27 (IGN) - Body ground

Engine switch on (IG)

11 to 14 V

G68-13 (ACC) - Body ground

Engine switch on (ACC)

11 to 14 V

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G68-28 (GND) - Body ground

Always

Below 1 Ω

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

    Parts Location

    Precaution

    See More:

    Toyota Avalon Service & Repair Manual > Vehicle Proximity Notification System: Operation Check
    OPERATION CHECK VEHICLE PROXIMITY NOTIFICATION SYSTEM OPERATION CHECK (a) System operation check (vehicle stopped) (1) Apply the parking brake. (2) Turn the power switch on (READY). (3) With the brake pedal depressed, confirm that the vehicle proximity notification system does not operate (produce a ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0132