DESCRIPTION The skid control ECU (brake actuator assembly) sends signals such as cruise control cancel signals and brake demand response signals to the ECM when the dynamic radar cruise control system is operating.
CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(a) Using the Techstream, check if the CAN communication system is functioning normally. Click here
(a) Clear the DTCs. Powertrain > Radar Cruise1 > Clear DTCs(b) Make sure that the DTC detection conditions are met. HINT: If the detection conditions are not met, the system cannot detect the malfunction. (c) Check for DTCs. Powertrain > Radar Cruise1 > Trouble Codes
(a) Replace the brake actuator assembly. Click here
(a) Clear the DTCs. Powertrain > Radar Cruise1 > Clear DTCs(b) Make sure that the DTC detection conditions are met. HINT: If the detection conditions are not met, the system cannot detect the malfunction. (c) Check for DTCs. Powertrain > Radar Cruise1 > Trouble Codes
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electric Parking Brake System(for Hv Model): Terminals Of Ecu
TERMINALS OF ECU CHECK PARKING BRAKE ECU (BRAKE ACTUATOR ASSEMBLY) *a Front view of wire harness connector (to Parking Brake ECU (Brake Actuator Assembly)) - - (a) Disconnect the A39 parking brake ECU (brake actuator assembly) connector. (b) Measure the voltage and resistance according to the value ...