DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) sends signals such as cruise control cancel signals and brake demand response signals to the hybrid vehicle control ECU when the dynamic radar cruise control system is operating.
CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(a) Using the Techstream, check if the CAN communication system is functioning normally. Click here
(a) Clear the DTCs. Powertrain > Radar Cruise1 > Clear DTCs(b) Make sure that the DTC detection conditions are met. HINT: If the detection conditions are not met, the system cannot detect the malfunction. (c) Check for DTCs. Powertrain > Radar Cruise1 > Trouble Codes
(a) Replace the brake booster with master cylinder assembly. Click here
(a) Clear the DTCs. Powertrain > Radar Cruise1 > Clear DTCs(b) Make sure that the DTC detection conditions are met. HINT: If the detection conditions are not met, the system cannot detect the malfunction. (c) Check for DTCs. Powertrain > Radar Cruise1 > Trouble Codes
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Headup Display: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during headup display (meter mirror sub-assembly) removal/installation are shown below. Necessary Procedure Aft ...