CAUTION / NOTICE / HINT HINT:
PROCEDURE
(a) Measure the auxiliary battery voltage with the power switch off. Standard Voltage: 11 to 14 V If the voltage is below 11 V, replace or recharge the auxiliary battery before proceeding to the next step.
(a) Using the Techstream, check if the CAN communication system is functioning normally. HINT: Refer to CAN Bus Check in CAN Communication System. Click here
OK: CAN communication system is functioning normally.
HINT: Refer to DTC Check / Clear. Click here (a) Check for DTCs and note any codes that are output. Chassis > Front Recognition Camera > Trouble Codes(b) Clear the DTCs. Chassis > Front Recognition Camera > Clear DTCs(c) Recheck for DTCs. Try to reproduce the DTCs by duplicating the conditions indicated by the DTCs. Chassis > Front Recognition Camera > Trouble Codes
HINT: Refer to Problem Symptoms Table. Click here
(a) Terminals of ECU Click here (b) Data List / Active Test Click here
NOTICE: If the forward recognition camera has been replaced with a new one, it is necessary to perform forward recognition camera adjustment. Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Cooling Fan System: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT COOLING FAN SYSTEM CAUTION: To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fan when inspecting the cooling fan system. (a) Connect the Techstream to the DLC3. (b) Turn the power switch on ( ...
